Copper gutters and downspouts, made in our shop.
What we make
Copper gutters and everything that goes with them
Fabricated in our Cleburne shop, in 16 oz or 20 oz copper, and shipped anywhere in the country. Catalog photos show each kind of piece; the project photos across the site are our own work.
Two ways to buy
Materials anywhere. Installation nearby.
Everything we make can be shipped. Only installation stays close to home.
Materials, shipped nationwide
Gutters, downspouts, collector heads, accessories and custom pieces, fabricated to your list and shipped to you or your contractor.
- Any state in the US
- Cut to your lengths, labelled by run
- Shipping added to the quote by weight and destination
Installation, local to Cleburne
Our own crew installs what we fabricate, on homes within driving distance of the shop in Cleburne, Texas.
- Site measure before fabrication
- Hung, soldered and water-tested
- Confirmed by ZIP code when you request a quote
Materials are fabricated in Cleburne and shipped nationwide. Installation is a separate, local service for addresses near Cleburne, confirmed by ZIP code when you request a quote.
Price it yourself
Build your estimate in a few clicks
Pick a product, choose the size and thickness, enter your linear feet and add the accessories. Then send it to us as a quote request.
- Choose a product and its size
- Pick 16 oz or 20 oz copper
- Enter linear feet or a quantity
- Add end caps, miters, outlets and hangers
- Choose materials only, or materials with installation
Or start from a product
Hover or tap a product for a preview, then open it to see the specs and price it.
Half-round copper gutterThe classic rounded profile. Fabricated to the lengths you need, in 5, 6 or 7 inch widths.
K-style copper gutterThe ogee-front profile that matches most modern fascia. Fabricated in 5, 6 or 7 inch widths.
Round copper downspoutSmooth round downspout in 3 or 4 inch diameter, the usual match for half-round gutter.
Rectangular copper downspoutSmooth rectangular downspout in 2x3 or 3x4 inch, the usual match for K-style gutter.
Copper downspout elbowElbows to turn the downspout under the eave and out at the bottom, in each downspout size.
Copper collector headA conductor head that catches water from a scupper or outlet and feeds the downspout, in two sizes.
Half-round end capCloses the end of a half-round run. Sized to the gutter.
K-style end capCloses the end of a K-style run. Sized to the gutter.
Half-round miterInside and outside corners for half-round gutter, fabricated and soldered to the profile.
K-style miterInside and outside corners for K-style gutter, fabricated and soldered to the profile.
Copper gutter outletThe drop from the gutter into the downspout, sized to the downspout.
Half-round gutter hangerExposed copper hangers that carry half-round gutter from the fascia or the roof edge.- K-style hidden hangerHidden hangers that clip inside K-style gutter and screw to the fascia.
Copper downspout bracketStraps and brackets that hold the downspout to the wall, sized to the pipe.
Copper gutter guardPerforated copper guard that fits over the gutter and weathers to match it.
Architectural copper
The copper work few shops still do
Gutters are where most people start with us. These are the pieces that bring people back.
Finials
Spires, balls and spears for turrets and gables
Turned and soldered from copper sheet and tube, with a base cut to your roof pitch. Made to your drawing or to one we make from your photos.
Decorated dormers
Dormers wrapped in copper, panel by panel
Flat, ribbed, scalloped or hammered panels for the face, cheeks and roof, flashed as a set so the whole dormer weathers together.
Louvers
Gable vents that are worth looking at
Fixed copper blades with an insect screen and a flange sized to your opening. Rectangular, round, half-round or arched.
Chimney caps
Caps and shrouds that finish the chimney
Single or multi-flue, with a hip, gable or flat lid, measured from your flue and crown so it fits the first time.
Why Hawk Copper
Six things you can count on
Nothing here is a slogan. Each one is how the shop works.
Our own shop
We fabricate what we sell
Gutters, heads, fittings and custom pieces are made in Cleburne, by us. Nothing is bought in and relabelled.
Soldered, not sealed
Joints that last as long as the copper
Miters, outlets and heads are soldered in the shop. Caulk fails in a few years; solder does not.
Made to measure
Cut to your runs, labelled by run
You send linear feet and corners. We send pieces that already fit, each one marked for where it goes.
Nationwide shipping
Texas to the northern states and beyond
Materials are packed for freight and shipped to any state. Only installation stays local.
Architectural copper
Finials, dormers, louvers and chimney caps
Hand-formed decorative work that most gutter shops no longer offer, made to your drawing or ours.
Written quotes
Estimates first, then a quote you can hold us to
The configurator gives you an estimate. We confirm the real numbers in writing, with materials and installation on separate lines.
Reviews
What customers say, in their own words
These reviews are loaded live from our review profile. We do not edit or select them.
Get in touch
Let's talk about your project
Tell us what you are building and where it is. There is no cost and no obligation.
What happens next
- We read your message and reply with any questions about measurements or the address.
- You get a written quote with materials, shipping and, where it applies, installation as separate lines.
- Approve it and your order goes on the shop schedule, with a date.
Other ways to reach us
Prefer to call? The shop answers the phone.
- Call the shop(972) 839-9166
- HoursMonday to Saturday: 6:30 AM to 9:00 PMSunday: By appointment only
- The shop5700 County Road 1217, Cleburne, TX 76033
Request a quote
Tell us what you are building
A few details are enough: the pieces, the linear feet and whether you want installation. We reply with a written quote.
We use what you send only to answer you and prepare your quote. We do not sell contact details.
Materials are fabricated in Cleburne and shipped nationwide. Installation is a separate, local service for addresses near Cleburne, confirmed by ZIP code when you request a quote.
Where we work
Shipping everywhere, installing nearby
The map shows the shop in Cleburne, Texas, and the area our installation crew covers. Materials go much further.
- Copper gutters
- Downspouts
- Collector heads
- Miters
- End caps
- Hangers
- Gutter guards
- Finials
- Dormers
- Louvers
- Chimney caps
- Metal roofing
- Metal roofing
- Chimney caps
- Louvers
- Dormers
- Finials
- Gutter guards
- Hangers
- End caps
- Miters
- Collector heads
- Downspouts
- Copper gutters
Materials ship to
Any state in the US. Most shipped orders go across Texas and to the northern states.
- All of Texas
- Northern states
- Every other state on request
Installation covers
Homes within driving distance of the shop. Enter your ZIP code in the configurator and we confirm it with your quote.
- Cleburne and Johnson County
- Nearby North Texas towns, confirmed by ZIP code
Installation area confirmed by ZIP code
Materials are fabricated in Cleburne and shipped nationwide. Installation is a separate, local service for addresses near Cleburne, confirmed by ZIP code when you request a quote.
Hawk Copper & Metal Art
Copper, made to last.
Build an estimate, or send a photo and a sentence. We will tell you what it takes.